Kontron JRexplus-DC - Manual (Page 53)

KTD-S0008-F Page 48 Setup Guide
JRexplus-DC User's Guide
22.5.2.5 Ethernet Configuration Submenu
Feature Option Description
Gigabit Ethernet Port Enabled
Disabled
Enable or disable the Gigabit Ethernet controller
Fast Ethernet Port Enabled
Disabled
Enable or disable the Fast Ethernet controller
Enable GbE Ethernet PXE
Rom
Enabled
Disabled
Enable or disable the option ROM to allow LAN boot functio-
nality for the Gigabit Ethernet controller
Enable Fast Ethernet PXE
Rom
Enabled
Disabled
Enable or disable the option ROM to allow LAN boot functio-
nality for the Fast Ethernet controller
22.5.2.6 USB Configuration Submenu
Feature Option Description
Module Version N / A Show USB module version
USB Devices Enabled N / A Show detected USB devices
USB Functions Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
Enable or disable the USB ports
USB 2.0 Controller Enabled
Disabled
Enable or disable the USB 2.0 controller (EHCI)
Legacy USB Support Disabled
Enabled
Auto
Enable support for legacy USB devices (e.g. keyboard and
mouse). 'Auto' disables legacy support if no devices are con-
nected
Port 64/60 Emulation Disabled
Enabled
Allow the complete USB keyboard legacy support
USB 2.0 Controller Mode FullSpeed
HiSpeed
Set the USB 2.0 controller to HiSpeed (480 Mbps) or Full-
Speed (12 Mbps) for legacy mode
BIOS EHCI Hand-Off Disabled
Enabled
This patch must be allied for operating systems before WIN
XP which have problems gaining control over USB 2.0 ports.
If enabled this provides a simple semaphore based mecha-
nism for exchanging EHCI ownership
Hotplug USB FDD Support Disabled
Enabled
Auto
A dummy FDD device is created that will be associated with a
hot-plugged FDD later. 'Auto' creates this device only if
there is no USB FDD present
8USB Mass Storage
Device Configuration
Submenu Display the status of USB mass storage devices