1 introduction, Introduction, 1introduction – Kontron KTA70M-mITX User Manual
Page 8
KTD-N0861-B
Page 1
Introduction
KTA70M/mITX Users Guide
KTA70M/mITX Users Guide
1
Introduction
This manual describes the KTA70M/mITX family of boards made by KONTRON Technology A/S. These board
will also be denoted KTA70M within this Users Guide.
The KTA70M family is based on AMD eTrinity platform: AMD BGA FP2 processor APU and AMD Fusion
controller Hub A70M (Hudson M3) on a mini ITX form factor. See the chapter System Specifications for more
specific details.
The KTA70M family consist on three members having the same functionality except for different BGA
processors (soldered to the board). The 3 versions have the same type of active CPU cooler premounted.
KTA70M variants
Sales PN
Processor data
KTA70M/mITX QC 1.9GHz(R-460H)
810524-4500
1.9/2.8 GHz – Quad Core – 35W
KTA70M/mITX QC 2.0GHz(R-460L)
810520-4500
2.0/2.8 GHz – Quad Core – 25W
KTA70M/mITX DC 1.9GHz(R-252F)
810522-4500
1.9/2.4 GHz – Dual Core – 17W
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the KTA70M board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the Installation Procedure stated in the following chapter before
switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via the
BIOS setup menus. Only exceptions are the Clear CMOS jumper and the Always On jumper.
Latest revision of this manual, datasheet, BIOS, drivers, BSP’s (Board Support Packages), Mechanical
drawings (2D and 3D) can be downloaded from here: