Kontron KTA70M-mITX - Manual (Page 13)

KTD-N0861-B Page 6 System Specification
KTA70M/mITX Users Guide
KTA70M/mITX Users Guide
LAN Two RJ45 connectors J8 (in REAR-IO area)
•
2x 10/100/1000Mbits/s LAN (ETH1/ETH2) using Intel® Pearsonville xGB PCI Express
Ethernet controller (WGI211ATSLJXZ).
• PXE Netboot supported.
• Wake On LAN (WOL) supported
USB 13x USB ports (9x USB2.0 & 4x USB2.0/USB3.0):
2x USB2.0 in Frontpanel Connector J5
2x USB2.0 in USB Internal USB Connector J16
4x USB2.0, USB stack J20 (in REAR-IO area)
2x USB 2.0/USB3.0, Right USB stack J14 ( in REAR-IO area)
2x USB 2.0/USB3.0, left USB stack J15 (in REAR-IO area)
1x USB 2.0 in mPCIe socket J38
Serial port 2x RS232 pin header (+12V, -12V supply generated by driver circuit)
COM1 2x 5 Pin row J23
COM2 2x 5 Pin row J22
LPC LPC connector J29
FAN CPUFAN 4 pin row J25 12V PWM
SYSFAN 4 pin row J24 12V PWM
PS2 Kbd/Mse 1x 6 Pin row Keyboard / Mouse PS2 cable kit interface J27
Power Plug 1x 4 pole External connector J28 (in REAR-IO area)
1x 4 pole Internal connector J19
(+12V Single Supply , Max 260W)
1x 2 pole Internal 12V Standby power input J31
1x 4 pin row Power Out 12V (4 Amp max.) and 5V (3 Amp max.) J18
Battery Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6 years retention.
Current draw is 4 µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Speaker On-board Speaker Piezo
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)