Kontron KTA70M-mITX - Manual (Page 14)

KTD-N0861-B Page 7 System Specification
KTA70M/mITX Users Guide
KTA70M/mITX Users Guide
Environmental Operating:
0°C – 60°C operating temperature (forced cooling). It is the customer’s responsibility to
provide sufficient airflow around each of the components to keep them within allowed
temperature range.
10% - 90% relative humidity (non-condensing)
Storage:
-20°C – 70°C; lower limit of storage temperature is defined by specification restriction of
on-board CR2032 battery. Board with battery has been verified for storage temperature
down to -40°C by Kontron.
5% - 95% relative humidity (non-condensing)
Electro Static Discharge (ESD) / Radiated Emissions (EMI):
All Peripheral interfaces intended for connection to external equipment are ESD/ EMI
protected.
EN 61000-4-2:2000 ESD Immunity
EN55022:1998 class B Generic Emission Standard.
Safety:
EN 60950-1: 2006/ A11:2009/ A1:2010/A12:2011
IEC 60950-1(ed.2)
CSA C22.2 No. 60950-1
Product Category: Information Technology Equipment Including Electrical Business
Equipment
Product Category CCN: NWGQ2, NWGQ8
File number: E194252 (
E194252-A21-CB-1)
Theoretical MTBF:
327.518 / 162.430 hours @ 40ºC / 60ºC
Restriction of Hazardous Substances (RoHS):
All boards in the KTA70M family are RoHS/RoHS-II compliant.
Capacitor utilization:
No Tantalum capacitors on board
Only Japanese brand Solid capacitors rated for 100 ºC used on board
BIOS AMI EFI
SPI Connector J21 (for BIOS Recovery)
Clear CMOS J34
Always On J37
OS (planned) Windows 7 (32 and 64bit)
Windows 8 (32 and 64bit)
Windows XP (32 bit)
DOS
Windows Embedded 7