Kontron AT8404 - Manual (Page 86)

Software Description
73 AT8404 User Guide
www.kontron.com
4.3.2.7 CmdClockGetPLLConfig
Command Name NetFn LUN Command Number
CmdClockGetPLLConfig 0x30 3 0x75
Byte Num Data Field
Request Data 1...5
Token:
0xAB - (~T)
0xCA - (~5)
0xCC - (~3)
0xCF - (~0)
0xC8 - (~7)
6
Parameter:
0 - HAL_PLL_PARAM_PLL_TIE_CLR
1 - HAL_PLL_PARAM_PLL_MODE
2 - HAL_PLL_PARAM_PLL_OOR
3 - HAL_PLL_PARAM_RESET
4 - HAL_PLL_PARAM_REFERENCE_SRC
Response Data 1 Completion Code
2
Setting:
Adjust Interval Error Adjustment
0 – adjust phase to match reference
1 – normal
PLL operation mode
0 – normal mode
1 – freerun mode
Out-of-range selection
0 – 40-52ppm
1 – 64-83ppm
Hardware reset
0 – normal operation
1 – reset
PLL Reference Clock Source Selection
0 – no PLL inputs specified
1 - PLL inputs from CLK1A & CLK1B
2 - PLL inputs from CLK2A & CLK2B
3 - PLL inputs from CLK3A & CLK3B