5 sas channels, 6 sas hard drive option, 5 sas channels 3.2.6 sas hard drive option – Kontron AT8404 User Manual
Page 55: Figure 3-3: sas port mapping
Hardware Description
42
AT8404 User Guide
www.kontron.com
3.2.5 SAS Channels
An external x4 SAS/SATA connector provides access to two of the AT8404 AMC bays, See “Storage Intercon-
nect” on page 23.. The connector is a SFF-8470 fixed (receptacle) shielded connector with jack screws.
A SAS signal conditioner (repeater) and multiplexer is needed to guarantee SAS signal integrity over the cable
between two RTM blades. The maximum SAS cable length between two RTM blades is 4m. SAS links work after
both RTM units have been powered up. SAS port mapping is drawn below:
Figure 3-3: SAS Port Mapping
3.2.6 SAS Hard Drive Option
Kontron offers the option of adding a SAS hard drive on the RTM8030. This hard drive is located on the com-
ponent side of the PCB, in the lower part of the RTM8030.
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)