Kontron AT8404 - Manual (Page 61)

Software Description
48 AT8404 User Guide
www.kontron.com
• Permit/deny actions for inbound or outbound Layer 2 traffic classification based on:
• Source MAC address
• Destination MAC address
• Ethertype
• 802.1p user priority (outer and/or inner VLAN tag)
• VLAN identifier value or range (outer and/or inner VLAN tag)
• Optional rule attributes:
• Assign matching traffic flow to a specific queue
• Redirect or mirror (flow-based mirroring) matching traffic flow to a specific port
• Generate trap log entries containing rule hit counts
4.1.2.3 Class of Service (CoS)
• Direct user configuration of the following:
• IP DSCP to traffic class mapping
• IP precedence to traffic class mapping
• Interface trust mode: 802.1p, IP Precedence, IP DSCP, or untrusted
• Interface traffic shaping rate
• Minimum and maximum bandwidth per queue
• Strict priority versus weighted (WRR/WFQ) scheduling per queue
• Tail drop versus Weighted Random Early Detection (WRED) queue depth management
4.1.2.4 Quality of Service MIBs (via Management Module)
• RFC 3289 – Management Information Base for the DiffServ architecture (read-only)
• Private MIBs for full configuration of DiffServ, ACL, and CoS functionality
4.1.3 Fastpath Management
4.1.3.1 Core Features
• RFC 854 – Telnet
• RFC 855 – Telnet option specifications
• RFC 1155 – SMI v1
• RFC 1157 – SNMP
• RFC 1212 – Concise MIB definitions
• RFC 1867 – HTML/2.0 forms with file upload extensions
• RFC 1901 – Community-based SNMP v2
• RFC 1905 – Protocol operations for SNMP v2
• RFC 1906 – Transport mappings for SNMP v2
• RFC 1907 – Management Information Base for SNMP v2
• RFC 1908 – Coexistence between SNMP v1 and SNMP v2
• RFC 2068 – HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
• RFC 2271 – SNMP framework MIB