Kontron AT8404 - Manual (Page 108)

Software Description
95 AT8404 User Guide
www.kontron.com
3. Check config
(Ethernet Fabric) #show boardinfo clock amc
AMC clock Source/Target State Family Accuracy Frequency
----------- ----------------- --------- ---------- -------------- -----------
amcb1 tclka from: pll disable
amcb1 tclkb to : bpl disable
amcb1 tclkc from: pll disable
amcb1 tclkd to : bpl disable
amcb2 tclka from: pll disable
amcb2 tclkb to : bpl disable
amcb2 tclkc from: bpl clk1a enable sonet(1) stratum3E(50) 8kHz
amcb2 tclkd to : bpl disable
amcb3 tclka from: pll disable
amcb3 tclkb to : bpl disable
amcb3 tclkc from: pll disable
amcb3 tclkd to : bpl disable
amcb4 tclka from: pll disable
amcb4 tclkb to : bpl disable
amcb4 tclkc from: pll disable
amcb4 tclkd to : bpl disable
4.6 Carrier Configuration
4.6.1 Switch default settings
For the standard product, 3 different VLANs are configured to separate BI and FI (channel 1 and 2) traffic.
Setup VLANs:
• 4001 for BI channel 2
• 4002 for FI channel 1
• 4003 for BI channel 2
The following shows an output of /mnt/fastpath/startup-config:
vlan database
! vlan 1 is BI Channel_1 untagged
vlan 4001
vlan 4002
vlan 4003
vlan name 4001 BI_Channel_2
vlan name 4002 FI_Channel_1
vlan name 4003 FI_Channel_2
exit
configure
! configure all interfaces
! Into their respective VLANs
interface 0/1
description AMC_B1_FI_Port_8
vlan participation exclude 1
vlan participation include 4002
vlan participation include 4003