Kontron AT8404 - Manual (Page 30)

Installation
17 AT8404 User Guide
www.kontron.com
2.6.3 Storage Configuration
The storage connection on Port 2 of AMC B4 is linked to AMC B2 (port 2) by default. To establish a storage
connection between AMC bays 1 (port 3) and 4 (port 2), use the following command in privileged mode:
(Ethernet Fabric) #set board storage connect amcb4 amcb1
To reset the configuration to the default settings, use the following command:
(Ethernet Fabric) #set board storage connect amcb4 amcb2
For an overview of the current configuration, use the CLI boardinfo command:
(Ethernet Fabric) #show boardinfo storage
The AMC B4 (port 2) is connected to AMC B2 (port 2)