Kontron CP6002 uEFI BIOS - Manual (Page 61)

CP6002 uEFI BIOS The uEFI Shell
ID 1039-1612, Rev. 2.0 Page 55
USAGE: Show board identification data
COMMAND / RESPONSE:
Shell> kboardinfo
KOMaOEMF rev.: 3
Board ID: 0xB340
Hardware rev.: 0x1
Logic rev.: 0x2
Boot flash: Boot flash 0
In system slot: Yes
Geographic address: 3
Material number:
Hardware index:
Serial number:
EFI article name: SK-EFI-B3401
EFI material number:
EFI index: 21, standard
NorthBridge rev.: 0x18
SouthBridge rev.: 0x6
Microcode: 0x2
CPU ID: 0x20655
CPU Branding: Intel(R)Core(TM) i7 CPU
E 610 @ 2.53 GHz
RIO Module 0x010
REMARKS: KOMaOEMF rev.: Revision of KOMaOEMF protocol
Board ID: Kontron board identification value
Hardware rev.: Hardware revision of this board
Logic rev.: Logic revision of this board
Boot flash: Current boot flash: either “Boot flash 0” or
“Boot flash 1”
In system slot: Yes / no
Geographic Address: Geographic address of the cPCI back-
plane slot the board is currently plugged into
Material number: Kontron hardware reference number
Hardware index: Kontron hardware index
Serial number: This board’s unique serial number
EFI article name: Kontron uEFI reference name
EFI material number: Kontron uEFI reference number
EFI index: Version of this uEFI BIOS
NorthBridge rev.: Chip revision of the NorthBridge (GMCH die
of the Intel® Core™ i7 processor)
SouthBridge rev.: Chip revision of the SouthBridge
(Intel ® QM57)
Microcode: Currently loaded microcode
CPU ID: CPUID
CPU Branding: CPU identification string
RIO Module: RIO identification string
kboardinfo