Kontron CP6002 uEFI BIOS - Manual (Page 17)

CP6002 uEFI BIOS Main Setup
ID 1039-1612, Rev. 2.0 Page 11
2.4 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the EFI console.
2.4.1 COM0
The COM0 port (serial port 0) corresponds to the serial port on the front panel of the CP6002.
2.4.1.1 Console Redirection
Default setting: Enabled
2.4.1.2 Console Redirection Settings
For information about this function, refer to Chapter 2.4.4 in this manual.
2.4.2 COM1
The COM1 port (serial port 1) corresponds to the RS-422 (hardware designation COM2) serial
port on the RIO connector (J3) of the CP6002.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Boot Security Save & Exit
COM0
Console Redirection [Enabled]
 Console Redirection Settings
COM1
Console Redirection [Disabled]
 Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
 Console Redirection Settings
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for the serial port 0.
Enabled Use this setting to enable console redirection for the serial port 0.