Console redirection, Console redirection settings, Main setup cp6002 uefi bios – Kontron CP6002 uEFI BIOS User Manual
Page 18

Main Setup
CP6002 uEFI BIOS
Page 12
ID 1039-1612, Rev. 2.0
2.4.2.1
Console Redirection
Default setting: Disabled
2.4.2.2
Console Redirection Settings
For information about this function, refer to Chapter 2.4.4 in this manual.
2.4.3
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
The following functions control the presence and content of the ACPI serial port redirection ta-
ble (SPCR). This table is mainly used by the Windows server variants to provide Windows
Emergency Management Services (EMS). This functionality is totally independent from serial
redirection of other console output.
OoB Management or EMS makes it possible to control selected components of (Windows)
servers, even when a server is not connected to the network or the network is not available. In
short: EMS allows for remote management of a Windows Server OS through a serial port
2.4.3.1
Console Redirection
Default setting: Disabled
SETTING
DESCRIPTION
Disabled
Use this setting to disable console redirection for the serial port 1.
Enabled
Use this setting to enable console redirection for the serial port 1.
SETTING
DESCRIPTION
Disabled
Use this setting to prevent the system from adding the SPCR table to the ACPI tables.
Enabled
Use this setting to add the SPCR table to the ACPI tables. The OS can further use the infor-
mation provided for serial redirection services.