Kontron CP6002 uEFI BIOS - Manual (Page 34)

Chipset Setup CP6002 uEFI BIOS
Page 28 ID 1039-1612, Rev. 2.0
3.1.1.3.2 SATA Mode Selection
This function is used to select the operational mode of the SATA controller when it is enabled.
Default setting: IDE
3.1.1.3.3 SATA RAID Software Feature Mask Configuration
This screen provides functions for configuring various RAID parameters.
SETTING DESCRIPTION
IDE Use this setting to select IDE mode operation.
AHCI Use this setting to select AHCI mode operation.
RAID Use this setting to select RAID mode operation.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
RAID0 [Enabled]
RAID1 [Enabled]
RAID10 [Enabled]
RAID5 [Enabled]
Intel Rapid Recovery [Enabled]
OROM UI and BANNER [Enabled]
Intel Rapid Recovery [Enabled]
HDD Unlock [Enabled]
LED Locate [Enabled]
IRRT Only on eSATA [Disabled]
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.