ETS-Lindgren HI-1710 Microwave Measurement System (Archived) - Manual (Page 8)

HI n 1710 Manual Page — 3
2.0 HI n n 1710 SPECIFICATIONS
1. Calibrated at 2450 MHz. for use in the ISM band.
2. Four ranges: 0-1, 0-2, 0-5, 0-10 mW/cm 2 .
3. Response Characteristics (0 to 90% of final value
for step input):
F1 - 1.2 seconds (2 stage Butterworth filter, Fc =
0.5 Hz.)
F2 - Less than 0.5 second (2 stage Butterworth
filter, Fc = 0.5 Hz.)
F3 - Four Pole Butterworth filter, Fc = 0.45 Hz.
F4 - Four Pole Butterworth filter, Fc = 0.90 Hz.
4. Maximum Power Density 2.0 Watts/cm 2 (2000
mW/cm 2 )
5. Power: 115/230 VAC 50-60 Hz. (switch
selectable)
6. Operating Temperature: 15 / - 40 / Celsius
7. Dimensions: 11 x 8 x 6.5 high
(280x204x165mm)
8. Probe Length: 12 inches (305 mm)
Cable Length: 9 feet (2.74 meters)
9. Shipping weight: 15 pounds (6.8 KG)
Archived 4/2/10