ETS-Lindgren HI-1710 Microwave Measurement System (Archived) - Manual (Page 15)

Page — 10 HI n 1710 Manual
Figure 1
HI-1710 Front Panel
continued accuracy.
Front Panel Settings Refer to figure 1
Default Settings
When the instrument is turned on, the instrument is
initialized to pre-determined default settings. The
instrument can be used for normal production line testing
with the default settings. The ALARM SET POINT is
saved in Battery Backed RAM and will return to its preset
value each time the instrument is turned on or reset.
This value is initially set near the top of the operating
range during factory testing. The RS-232 serial port baud
rate setting is also saved in RAM. Its initial value is set
to 1200 baud during factory testing.
Archived 4/2/10