beautypg.com

Archived 4/2/10 – ETS-Lindgren HI-1710 Microwave Measurement System (Archived) User Manual

Page 10

background image

HI

n

1710 Manual

Page — 5

Calibration

Each Probe/preamp assembly is calibrated by placing the
probe in a known 2450 MHz field. Calibration is
performed at a standard temperature of 75 degrees
Fahrenheit in an anechoic chamber, utilizing a slot
radiator. A CW field is generated using a crystal
controlled solid state source. The power monitoring
system is the HI-2795 Calibration Comparison System.
The calibration field level is established using a reference
survey meter with CDRH calibration correction factors.
All ranges are calibrated at mid-scale.

Archived 4/2/10