ETS-Lindgren HI-1710 Microwave Measurement System (Archived) - Manual (Page 12)

HI n 1710 Manual Page — 7
3.0 ACCEPTANCE
Introduction
This section contains information on unpacking and
acceptance of the HI
n 1710.
Unpacking and Acceptance
Step 1. Upon delivery of your order, inspect the
shipping container(s) for evidence of damage.
Record any damage on the delivery receipt
before signing. In case of concealed damage or
loss, retain the packing materials for inspection
by the carrier.
Step 2. Remove the instrument from its shipping
containers. Save the boxes and any protective
packing materials for future use.
Step 3. Check all materials against the packing list to
verify that the equipment received matches that
which was ordered. If you find any
discrepancies, note them and call Holaday
Customer Service (952-934-4920) for further
instructions.
Be sure that you are satisfied with the contents of your
order and the condition of your equipment before
installing the instrument.
Archived 4/2/10