Elecraft XG3 RF - Manual (Page 26)

26
N
Read Keyboard.
Waits for a key to be pressed on the keyboard and then returns the key code. Note: during this
command keyboard entry and operation of the unit will be suspended. Returned key codes are: 001 =
On/Off Key, 002 = Level Key, 003 = Band -, 004 = Band +. When the N command is sent, the XG3
will not display anything until a key is pressed.
Send:
N;
XG3: nothing
XG3 after a key is pressed: N,001;
(normal operation resumes)
Z
Internal Use Only
U
Internal Use Only