Elecraft XG3 RF - Manual (Page 24)

24
Displays: nothing (power turns off)
Y
Set factory defaults
Fills the frequency memory locations 0 - 11 with the factory default values:
160m
LED 0 00001820000 1.820 MHz
80m LED 1 00003520000 3.520 MHz
60m LED 2 00005330500 5.3305 MHz
40m LED 3 00007020000 7.020 MHz
30m LED 4 00010120000 10.120 MHz
20m LED 5 00014020000 14.020 MHz
17m LED 6 00018120000 18.120 MHz
15m LED 7 00021020000 21.020 MHz
12m LED 8 00024900000 24.900 MHz
10m LED 9 00028020000 28.020 MHz
6m LED 10 00050120000 50.120 MHz
2m LED 11 00144220000 144.220 MHz
PF1 sweep memory 1: 7.020 to 7.120 MHz, 100 Hz step, 20 ms per step, no repeat
PF2 sweep memory 2: 144 to 148 MHz, 10000 Hz Step, 1000 ms per step, repeat
Send: Y;
XG3: nothing