Elecraft K144XV Manual - Manual (Page 7)

7
Parts Included
The following parts should be included in your kit. Check to ensure you have them all. If any parts are damaged
or missing, contact Elecraft for replacements (see Customer Service and Support, page 4).
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
K144XV PC Board Assembly mounted in
enclosure bottom cover.
CAUTION: Do not touch or move any
of the red coils. Doing so will detune
the circuits.
1 E850376
K144XV Top Cover (Normally supplied
mounted on bottom cover to protect the
pc board.)
1 E850379
KPA3 K3 Fan Panel (Top)
K3 Blank Panel (Bottom)
NOTE: Your kit will include one of these
panels depending upon whether you have
a K3/10 or K3/100.
1 E100288
1 E100215
Chassis Stiffener (with extra cutout
required to fit over the K144XV Module.)
1 E100222
Hardware Package
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
One Pin Connector 1 E620176
K144XV Power Cable 1 E850735
KX144 TMP-BNC Cable Assembly,
14 in (35.6 cm)
1 E850378
TMP Cable, 6-Inch (15.2 cm) 1 E100282