Dynojet 250iX: Upgrade Installation Guide - Manual (Page 53)

R A M P K I T I N S T A L L A T I O N
Ramp Installation
Version 1 Model 200iX/250iX Upgrade Installation Guide
B-3
5 Secure the ramp panel to the iX ramp using four 1/4-20 x 5/8-inch pan-head torx
screws and four 1/4-20 nuts.
6 Secure the ramp panel to the dyno ramp using four 1/4-20 x 5/8-inch pan-head
torx screws and four 1/4-20 nuts.
Note: If the dyno ramp does not have the holes, drill four 1/4-inch holes.
Figure B-2: Securing the Ramp Panel to the Ramp
iX ramp
ramp panel
dyno ramp