Dynojet 250iX: Upgrade Installation Guide - Manual (Page 28)

Model 200iX/250iX Upgrade Installation Guide
C H A P T E R 1
Trike Carriage Adapter Installation
1-20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TRIKE CARRIAGE ADAPTER INSTALLATION
Use the following instructions to remove the carriage assembly, install the trike
carriage adapter (P/N 71300002), and replace the carriage assembly.
You will need the following parts:
• 15331100 Chain Lube
• 21200041 Clamp Spacer (3)
• 21200042 Nut Driver Spacer
• 21200045 Trike Carriage Adapter Slide, Rear
• 21200046 Trike Carriage Adapter Slide, Front
• 21200058 Nut Block
• 21200060 Carriage Clamp (3)
• 21200061 Carriage Tie, Left
• 21200062 Carriage Tie, Right
• 35500001 Trike Adapter Plunger
• 36500008 Capscrew, 5/16-UNC x 1”, Button-head (6)
• 36500009 Capscrew, 3/8-16UNC x 1”, Button-head (2)
• 61300013 Trike Carriage Adapter Base
• DM150-002-004 Lock Washer, 5/16" (8)
• DM150-053 Bolt, 5/16-18 x 1", Hex (8)