Dynojet 250iX: Upgrade Installation Guide - Manual (Page 31)

M O D E L 2 0 0 I X / 2 5 0 I X U P G R A D E
Trike Carriage Adapter Installation
Version 1 Model 200iX/250iX Upgrade Installation Guide
1-23
I NSTALLING THE T RIKE C ARRIAGE A DAPTER A SSEMBLY
1 Secure the trike carriage adapter assembly to the dyno using six 5/16 x 1-inch
button-head bolts where the carriage assembly was installed and two 3/8 x 1-inch
button-head bolts as shown in Figure 1-19.
2 Lube the tracks with the included lube or use grease.
Figure 1-19: Installing the Trike Carriage Adapter Assembly
5/16 x 1-inch bolts
3/8 x 1-inch bolts
trike carriage
adapter assembly