Dynojet 150: Eddy Current Brake - Manual (Page 16)

Eddy Current Brake Installation Guide
C H A P T E R 1
Eddy Current Brake
1-10
2 Loosely attach one of the connecting arms to the bottom of the eddy current
brake using four 3/8-inch bolts and four 3/8-inch washers.
3 Loosely attach the remaining connecting arm to the top of the eddy current brake
using four 3/8-inch bolts and four 3/8-inch washers.
Note: All eight bolts need to remain loose in order to align the brake.
Figure 1-13: Install the Connecting Arms
connecting arm
bolt (only one visible
from this view
washer