Fastener table, Tools required – Detex Delayed Egress With Magnetic Lock User Manual
Page 3
No pilot hole necessary for
self-drilling screws
Recommended on Fire Rated Wood and
Unreinforced Hollow Metal Doors
Used on Strike Hook Mounting Holes
Recommended on Fire Rated Wood and
Unreinforced Hollow Metal Doors
Used on Mounting plate and Endcap Mounting Holes
-----
#7 or 13/64"
#1/4-20 Tap
-----
-----
#36 or 7/64
#25 or 9/64"
Drill Bit
-----
#6-32 Tap
#10-24 Tap
Tap Wrench
Used to Fasten Centercase Unit onto Mounting plate
or Sex Nuts
Comments
Used on 99 Strike Center Mounting Hole
Used on 98 Strike Shield Mounting Holes
Use Either Machine Screws, Sheetmetal Screws,
Used to Mount Centercase Cover and Endcap
Fastener Table
#1/4-20 x 1"
#1/4-20 x 1/4"
PPH
PPH
Machine Screws
#6-32 x 3/8"
#10-24 x 5/8"
#6-32 x 5/8"
PPH
PPH
PPH
Tape Measure
Center Punch
Hammer
Safety Glasses
Screw Driver
Level
(2) Mortise Cylinder NOT Provided.
Power Drill
Sex Nut
----
#10-32
----
#1/4-20
----
----
Used on Strike, Mounting plate, and Endcap Mounting Holes
Tools Required
Hack Saw
Pencil
3/8" Exterior Door Face
9/32" Interior Door Face
5/16" Exterior Door Face
13/64" Interior Door Face
-----
-----
-----
-----
Note: (1) Fastener selection will vary per catalog configuration and kits ordered.
Used on Strike, Mounting plate, and Endcap Mounting Holes
PPH
Sheetmetal Screws
PFH
#6 x 1"
#10 x 1"
#14 x 1-1/2"
PFH
Used on 98 Strike Shield Mounting Holes
Used on 99 Strike Center Mounting Hole
-----
9/64"
-----
-----
Metal Applications
Self-drilling Screws
103182 Page 3