Iso setting the iso film speed, Selecting the film advance mode – Canon EOS 7 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ISO Setting the ISO Film Speed
If the film is not DX-coded or if you want to set a different film speed, you
can set the film speed manually after loading the film into the camera. The
settable film speed range is ISO 6 to 6400,
1
Move the <►> arrow to the
icon.
• Look at the LCD panel and press the
button to move the arrow.
(
66
)
► The current film speed is displayed.
Set the desired film speed.
• Turn the dial to set the film
speed.
• Press the shutter button halfway to
return to normal camera operation.
W The manually-set film speed will be canceled if the film is taken out and DX-
coded film is loaded.
raf3il With C.Fn-3-1, you can retain the manually-set film speed even after taking out
the film and loading another DX-coded roll of film, (-»page 88)
Selecting the Film Advance Mode
There are two film advance modes; Single-frame shooting and continuous shooting.
□ Single-frame Shooting
After a picture is taken, the film
advances by one frame automatically.
Q) Continuous Shooting
Holding down the shutter button
advances the film continuously.
Silfr : Approx. 4 frames per second.
SERVO i Approx. 3.5 frames per second.
71