Checking the film speed, Press the – Canon EOS 7 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I Loading ana unioaaing i-nm

W In hot and humid environments, do not remove the film packaging until you are

ready to load the film

• If the film is not loaded properly, the < @> icon will blink on the LCD panel and

the shutter will not work. Reload the film cartridge properly.

• Infrared film cannot be used with this camera.

Checking the Film Speed

The camera reads the film cartridge’s DX code and sets the film speed
automatically within ISO 25 - 5000.

• Set the Command Dial to a Creative Zone mode.

Press the

func

button and

move the <►> arrow to < ISO > on

the LCD panel.

► The film speed will appear on the

LCD panel.

Q If you want to set a film speed different from the DX-coded film speed or if the

film cartridge is not DX-coded, see "Setting the ISO Film Speed ' on page 71.

ram C.Fn-3-1 can prevent the film speed from being set automatically with the DX

code. (->page 88)