Loading and unloading film, Loading film – Canon EOS 7 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(§) Loading and Unloading Film
Loading Film
1
2
Orange mark
Open the camera back.
• Slide the camera back lever down as
shown by the arrow.
Insert the film cartridge at an
angle as shown in the illustration.
• Set the Command Dial to any setting
except <(iI3a>.
Pull the edge of the film leader to
the orange mark on the camera.
• Hold down the film cartridge while
pulling out the film leader.
• If the edge of the film leader goes
beyond the orange mark, rewind
some of the film back into the
cartridge.
Wrong
Close the camera back.
' After checking that the film leader
edge is correctly aligned with the
orange mark, close the camera back.
• The film will advance to frame 1
automatically.
■ When the initial film advance ends,
the <@> icon and frame counter of
“ I" are displayed on the LCD panel.
23