Canon EOS 7 - Manual (Page 53)

P Program AE
4 Take the picture.
• Compose the shot and press the
shutter button completely.
The Difference Between
and <□>
• The
and <0> modes set the same shutter speed and aperture
settings automatically for picture-taking.
• The following features can be used with
, but not with <□>:
Manual focusing point selection • Built-in flash ON
Metering mode selection
Film advance mode selection
Program shift
AE lock with the < * > button
Exposure compensation
AEB
Depth-of-field preview
Multiple exposures
Custom Functions
Flash exposure compensation
EX-series Speediite compatibility
- High-speed sync
- FE lock
- Flash ratio control
- FEB
- 2nd-curtain sync
- Modeling flash
About Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (program) set by the camera while retaining the same
exposure. This is called program shift.
To shift the program, press the shutter button halfway and turn the
dial until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted program is
canceled automatically and the original program is restored.
• Program shift cannot be set when the built-in flash is used.
53