Checking the battery level, Turn the command dial to a picture-taking mode – Canon EOS 7 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing the Batteries and Checking the Battery Level

Checking the Battery Level

Check the battery level after replacing the batteries and before using the

camera.

Battery Service Life

Turn the Command Dial to a

picture-taking mode.

• Keep pressing the dial’s lock release

button while turning the dial.

• The camera will then turn on and the

LCD panel will display one of the

following battery level icons:

: Battery level OK.

Q : The battery level is low. Keep

spare batteries handy.

■'S

■ batteries will soon be

' completely exhausted.

: Replace the batteries.

''' (^page 7)

(With 24-ex. rolls)

Ambient Temperature

0% Flash Use

50% Flash Use

100% Flash Use

At 20’C

125 rolls

38 rolls

19 rolls

At-20’C

70 rolls

20 rolls

10 rolls

• The Battery Service Life table above is based on Canon’s testing

conditions using an EF 50mm f/1.4 USM lens and new batteries.

W • If nothing is displayed on the LCD panel, the batteries may have been installed

incorrectly. Take out the batteries and install correctly, (-»page 18)

• Pressing the shutter button halfway for a prolonged period or operating only the

autofocus without taking a picture will still consume battery power. It will reduce

the number of rolls that can be taken with the batteries.

When not using the camera, set the Command Dial to <®D;