Exposure compensation, Turn on the quick control dial switch to
Page 64

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Exposure Compensation

Changing the standard exposure level set by the camera during picture

taking is calied exposure compensation. Just turn the

<0>

dial and look

at the viewfinder. You can set the exposure compensation up to ±2 stops in

half-stop increments.

Overexposed amount

tгs

a'a.i.e.i.a"

Underexposed amount

g,-2.i.e.i.r

Turn on the Quick Control Dial

switch to .

Press the shutter button halfway

to focus the subject. (t?i4)

Check the exposure level.

Set the exposure compensation

amount.

• Turn the <0> dial to set the desired

amount.

• Turn the <

> dial while pressing the

shutter button halfway or within 4 sec.
after pressing the shutter button
halfway and letting go.

• You can also refer to the LCD panel

while setting the exposure

compensation amount.

• The < + > side indicates an

overexposed amount, and the < - >
side indicates an underexposed amount.

Underexposed

Overexposed

amount ^................n.............> amount

• The exposure compensation amount

set is retained even after the Command

Dial is set to <®® >.

• To cancel the exposure compensation,

set the exposure level indicator back to

■-i’’ After setting the exposure compensation amount, turn the Quick Control Dial

switch to to prevent inadvertent turning of the Quick Control Dial (thereby

throwing off the exposure compensation amount set).

Page 64