Unloading film, Midroll rewind – Canon EOS 7 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
@ Loading and Unloading Film
Unloading Film
After the film’s last frame Is exposed, the camera rewinds the film
automatically.
■ When the film starts to rewind, the
film rewind indicator on the LCD
panel will flow from right to left to
indicate that the film is rewinding.
The frame counter also counts down.
• The film rewind stops automatically.
Check that the <(§i> icon on the LCD
panel is blinking, then remove the
film cartridge.
Midroll Rewind
To rewind the film in midroll, follow the procedure below.
Press the < Q« > button.
► The film will start rewinding. The
subsequent operation will then be the
same as normal film rewind.
Take out the film cartridge.
• Check that the <@> icon on the LCD
panel is blinking, then remove the
film cartridge.
-i’- During film rewind, pressing the
low-speed (silent) rewind.
Custom Function C.Fn-1 can alter the rewind speed, (-»page 88)
rarat) Normally, the entire film leader is rewound inside the film cartridge. Custom
Function C.Fn-2-1 can leave out the film leader after film rewind, (-»page 88)
25