Setting the date and time, Replacing the quartz date back’s battery – Canon EOS 7 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Imprinting the Date or Time (QD Model only)
Setting the Date and Time
To set the date or time, follow the procedure below.
Select the date or time display.
• Press the
<
mode
> button.
Select the digit to be set.
• Press the
button
until
the
digit blinks.
Set the correct number.
• Keep pressing the
button until
the correct number appears.
Finalize the setting.
• Keep pressing the <
select
> button
until no digits blink.
Replacing the Quartz Date Back’s Battery
When the date/time on the imprinted photograph looks faded, replace the
CR2025 lithium battery as follows. Battery life is about 3 years.
Remove the battery chamber cover.
• Open the camera back and loosen
the screw as shown in the illustration.
Take out the battery.
Insert a new battery.
• The battery's positive contact (+)
must face up.
Reattach the battery chamber cover.
• Set the correct date and time.