Fill-in ratio control – Canon 430 EZ User Manual

Page 90

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fill-in Ratio Control

(EOS-1 and 630 only)

Previously, exposure compensation could only be

set on the camera, however, the 430EZ allows

flash exposure compensation (fill-in ratio control)

setting in 1/3 increments from -i-3 to -3.

This control can only be done in the following

modes.

• Program AE

• Shutter-priority AE
• Aperture-priority AE

• Manual

Set the flash to ATTL (TTL in manual).

Press the plus and minus (+ and -) buttons to

set the control level. (T)

Make sure that the shutter speed, aperture value

and

light and then press the shutter button

completely. @

•

• This function cannot be performed on the EOS 630

if the camera is set to the green O mark.

• The amount of control appears in the viewfinder of the

EOS-1 but not in the EOS 630.