Basic operation – Canon 430 EZ User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Basic Operation

Follow these steps for regular flash photos. These

settings will correspond to illumination conditions

ranging from total darkness to fill-in lighting.

Set the camera's main switch to the full auto

position. This is the green □ mark on the EOS

620, 630 and 650 and PROGRAM on the selector

dial for the EOS 750 and 850. (T)

•When the EOS-1 is used, set the shooting mode

to "Program" and the flash to ATTL.

Cover the main subject with the AF frame and

press the shutter button halfway,

• The infrared light emits from the flash to determine the

appropriate aperture value

• The X-sync shutter speed is automatically set from 1/60

sec. to 1/250 sec for the EOS-1 and 620 For the 630,

650, 750, and 850, 1/60 sec to 1/125 sec

Press the shutter button completely if the shutter

speed, aperture value, and “V’ mark are not blink

ing. If these displays blink, check the exposure
warnings. @