Auto internal zoom mechanism • automatic setting, Manual setting – Canon 430 EZ User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Auto Internal Zoom

Mechanism

• Automatic Setting

Turn the main switch on ('i' mark). When the shut
ter button is pressed halfway, the flash head posi
tion automatically adjusts according to the lens
focal length. The position setting and “EBBu)”

appear in the display panel. (J

Manual Setting

To change the flash head position manually, press

the zoom button until the desired setting appears.

@ (D

Each time the zoom button is pressed, the

display changes as shown in the following

figure. (4)

•

• The amount of illumination changes with the head

position. See page 77 for an explanation of the rela

tionship between the illumination range and quantity

• Be careful not to set a flash head position larger than

the lens focal length, or the edges of the picture will

become dark

• When resetting the automatic zoom from the manual

mode, press the zoom button and "BBEfiSI" appears.