Stroboscopic flash – Canon 430 EZ User Manual

Page 101

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Stroboscopic Flash

When manual flash Is used, It is possible to shoot
continuous motion for a flowing effect In the photo.
Set the flash intensity within the range of 1/4 to 1/32,

and then select the value from one to ten for the

number of flashes per second.

The relation between the flash intensity and the

number of flashes per second is shown in the chart
below.

Be sure to use new or freshly charged batteries

• The stroboscopic flash stops after twenty consecutive

flashes

• This function cannot be done with the EOS 750 or 850

Set the camera to “M" (manual mode). Set the

desired aperture and shutter speed. (T) @

• The shooting distance increases as the aperture

opens

• Set the shutter speed to cover all the subject's motion,

Press the mode button so [MULTI 1Hz] and "M

1/16" appear in the display panel to indicate the