Canon 430 EZ User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. When the shutter button is pressed halfway, a
preflash fires so that the necessary aperture is set.
The shutter speed and aperture value appear in
the viewfinder. @
4. Make sure the ‘V mark, shutter speed, and aper
ture value light continuously in the viewfinder; then
press the shutter button all the way. if the display
values blink, follow the exposure warnings in page
37.
• If a shutter speed faster than 1/250 (*1/125) is set, it
is automatically reset down to 1/250 (*1/125). Be careful
if the shutter speed is set to less than 1/60 sec. as
camera-shake is likely to ruin the picture.
* EOS 630 and 650.
35