Film speed setting, Display panel illumination, Af auxiliary light – Canon 430 EZ User Manual

Page 40: Mode memory function, Film speed setting display panel illumination

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Film Speed Setting

The film speed is set automatically by the camera.

Display Panel Illumination

Press the light button to illuminate the display panel

for approximately eight seconds in dark conditions.

If the light button is pressed again during the initial

illumination, the panel glows another ei^t seconds

from the time the button is pressed. Q)

AF Auxiliary Light

In dark settings that are difficult for autofocusing, the

AF auxiliary light automatically emits to facilitate
focus. The effective distance range is approximately
3 to 32.8 ft. (0.9 -10 m.) If the subject is too far away,

the AF in-focus indicator blinks. Move closer to the

subject @

Mode Memory Function

This function automatically memorizes the mode and

set value before the flash is turned off. This eliminates

the need for resetting.