Canon 430 EZ User Manual

Page 83

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Focus the subject. Press the shutter button

halfway to check that the shooting distance in
dicated in the distance scale window is within the

flash coupling range. (4)

Make sure that the “V mark in the viewfinder

appears and then press the shutter button.

> Shooting is not possible when the flash shooting

distance blinks in the flash display panel. When the

shooting distance range is beyond 99ft/30m, “ ►” mark

appears. (|)

' When setting the shutter speed and aperture value

manually, the TTL mode is set automatically even if

the ATTL mode was previously set. The illumination

is set so the main subject is exposed correctly. The
rapid-fire function cannot be used in the manual mode.