Standard equipment for enjoying dts sound, Set the setup menu correctly after connecting, Tv aspect – Sony XD-DV300 User Manual

Page 15: Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remove the dust cap on the DIGITAL

AUDIO OUT jack of the player.

Also, remove the dust

cap on the optical input

jack of the connected

equipment.

Connect the optical connecting cord

firmly so that the configurations of

both the plug and the jack match.

Keep the dust cap, and
always reattach the cap

when not using the jack
to protect against dust.

Standard equipment for enjoying DTS sound

Prepare the following equipment as well as this DVD player.

• One of the following amplifier/decoder

- An AV amplifier that contains a DTS decoder
- A DTS decoder and an AV amplifier

• Front speakers (L, R), center speaker, surround speakers

(L, R) and subwoofer

• DVDs recorded in DTS

Set the setup menu correctly after connecting!

According to the audio equipment and TV set to which the unit is
connected, set the “Audio Output Setting” and “TV Aspect” of setup

menu correctly referring to the following below.

See “CHANGING SETUP VALUE” on page 36 in detail.

Audio Output Setting

Digital Stream:

Down Mix PCS

dts Output:

Down Mix Type: Stereo or Surround*

* You can connect the MIXED AUDIO OUT jacks to aTV set or

an amplifier with a supplied connecting cord.
- When it is connected to a TV set, setting the Down Mix

Type to stereo is recommended. You can enjoy the stereo

sound from the TV set.

- When it is connected to an amplifier, setting the Down Mix

Type to Surround is recommended. You can enjoy the

surround sound from the speakers connected to the
amplifier.

TV Aspect
WhenyourTVsetis conventional-screen size TV: NORMAL TV
When your TV set is wide-screen size TV: WIDE TV

HOTES

• The unit cannot be connected to aTV set which is not equipped

with a video input connector.

• When the picture noise appears while copy-protected DVDs are

played, connect the unit directly to a TV set. Do not connect

through a VCR, TV/VCR or AV selector.

• For the speakers and their connection, refer to the instructions

for the AV amplifier.

CAUTION

If the AV amplifier is not equipped with a DTS decoder, do not

select “dts” in the “Audio Output Setting” when connecting the AV
amplifier with an optical connecting cord.

Merely attempting to play a DVD may cause a high ievel of noise

which could be harmful to your ears and damage the speakers. In
such a case, be sure to select “Down Mix PCM” in the “Digital

Stream”.

(£

ENGLISH