Sony SLV-M10HF - Manual (Page 81)

Changing menu options
Press MENU and select ADVANCED
OPTIONS.
Push the cursor stick to ♦ / ■!■ to select the
option to change, then push the cursor
stick to
to change the setting.
The ADVANCED OPTIONS menu has 2
pages. To select page 2, push the cursor
stick to ♦ repeatedly until page 2 appears.
To select page 1, push the cursor stick to ♦
repeatedly until page 1 appears.
Press the cursor stick (OK) to return to the
original screen.
Page 1
Menu choices
Initial settings are indicated in bold print.
Menu option
AUTO ANT SEL
AUTO STEREO
AUDIO MIX
TUNER AUDIO
SHARPNESS
DEFAULT SPEED
Set this option to
ON if your TV is connected only to VHF/UHF OUT on the VCR. To
play a tape, set the TV to the VCR channel (channel 3 or 4).
OFF if your TV is connected to both VHF/UHF OUT and LINE OUT
on the VCR. To play a tape, set the TV to the VCR input.
ON to receive stereo programs, OFF to reduce noise. The sound
changes to monaural.
ON to listen to the sound recorded on hi-fi and normal audio tracks at
the same time. The AUDIO MONITOR button will not function.
OFF to listen to hi-fi and normal audio tracks separately. Select the
sound using the AUDIO MONITOR button.
MAIN to record the main sound on both hi-fi and normal audio tracks.
SAP to record the SAP (Second Audio Program) sound on both hi-fi
and normal audio tracks.
L (Low) through H (High) to adjust the sharpness of the picture. L to
turn off the sharpness control.
EP to set the recording tape speed automatically back to EP after
recording.
SP to set the recording tape speed automatically back to SP after
recording.
FLOAT to set the recording tape speed to the last position selected
from-the SP/EP button.
• '
2 Additional Operations