Vcr plus+ channel setup, Notes, Automatic clock setting – Sony SLV-M10HF User Manual

Page 16: Hookup 2: vcr plus+ channel setup, Step 3: hookups (continued)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 3: Hookups (continued)

starts.

Hookup 2:

VCR Plus+ channel setup

Press MENU and select SET VCR Plus+
CHANNELS.

Push the cursor stick to

to select

AUTO and press the cursor stick (OK).

Press POWER to turn off the VCR.

TIMER SET/CHECK
TUNER PRESET
CLOCK SET

LANGUAGE

SET VCR PiofrE CHANNELS

CABLE BOX CONTROL
ADVANCED OPTIONS
SMART FILE EDIT

SMART CHANNEL MAPPING

¡AUTO [MANUAL I

Use to select
Then push iOKi
Push IMENUl to quit

The VCR receives the program information signal from 0:00 am to 5:00 am

while the VCR is turned off, and set up the charmel for VCR Plus+ recording.
After channel setup is finished, you can record TV programs using VCR
Plus+. For details, see page 49.

Notes

• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned

off and no timer recordings are set.

• If the charmels in your area don't carry the program information signals, set the

program guide channels manually. For details, see page 51.

• If the Choose your Cable CH MAP menu appears the first time you turn on the

VCR after finishing channel setup, select the MAP number. For details, see page 50.

Automatic clock setting

Once you've set up the VCR, it automatically sets the clock the first time you

turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clockr even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV charmels.

If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
37.

Getting Started