Searching for a selected point on the tape, To cancel searching, To turn off the bar indication – Sony SLV-M10HF User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching for a
selected point on
the tape
You can easily find a specific point by
moving the pointer on the TV screen.
The VCR fast-forwards or rewinds to the
point you indicate and starts playback
automatically.
1
Press DISPLAY repeatedly until the bar
indication appears on the TV screen.
A cursor (I) indicating the current position
of the tape appears on the bar indication. If
the cursor does not appear, play the tape a
few moments (by pressing PLAY, ►► FF
or ◄◄ REW) until the cursor appears.
2
Push the cursor stick to ■♦“ / ^ to move the
pointer (-h) to the point where you want to
start playback.
The VCR starts searching and the cursor
(I) moves toward the pointer. When the
VCR locates the marked point, playback
starts.
To cancel searching
Press O PLAY or ■ STOP.
To turn off the bar indication
Press DISPLAY again.
DISPLAY
Cursor stick
70
Additional Operations