Hookup 3, Antenna hookup, Use this hookup if you're using – Sony SLV-M10HF User Manual
Page 17: Rear of tv vhf/uhf, Connection is required, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 3
Pages 17 to 19
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
□ Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
- "*H@ A Match the type of
connector on your
TV; A, B, or C.
B
UHF
VHF
UHF
m
Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
VCR
VL
Rear of TV
VHF/UHF
® A Match the type of
connector on your
TV: A, B, or C.
VHF
- ■ '“'•pi B For connector types
B and C, no UHF
Unr
VHF
—
UHF
connection is
required.
If you cannot connect ydlir antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. • If you have separate cables
for
VHF and UHF antennas, you should
use a
U/V band mixer (not supplied). For details, see page 106.
continued
Getting Started