Sony SLV-M10HF - Manual (Page 18)

step 3: Hookups (continued)
Hookup 3: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set the
switch to either channel,
l-or details, see page 103.
If you made A/V
connections (from page 9),
you can skip this step.
2
Press EASY SET UP on the
VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press the cursor stick (OK). For details, see
page 32.
© The CLOCK SET menu appears. Select AUTO
and press the cursor stick (OK). For details, see
page 33.
© The SMART CH MAPPING menu appears.
Push the cursor stick to ♦/♦/♦■/“► to enter
the ZIP/POSTAL CODE in your area and press
the cursor stick (OK). (You can also use the
number buttons to enter the ZIP/POSTAL
CODE.)
O The CABLE BOX menu appears. Select OFF and
press the cursor stick (OK).
© The TUNER PRES&T menu appears. Set
ANTENNA/CABLE to ANT and press the
cursor stick (OK). For details, see page 44.
ESPAÑOL
FRANÇAIS
Use ¡4 4-1 lo select
Then push |0>^
en pi_________________
Push ¡EASY SET to quit
lAUTO imanual I
Use |±3to ^lec.
Then push (bk|
Push (
easy set U^ 1 0 quit
ZIP / POSTAL CODE K2^
Enter your ZIP/^DSTAL
CODE us i ng I0-9L o r It
and keys.
CABLE BOX CONTROL
CABLE MOUSE ION lOFF 1
Use to select
Push lEASY SËf~ÜP| to quit
ANTENNA/CABLE
I ANT 1C ABLE I
Use to selec i
Then push lOKi
Push (
easy set Ufl to quit
i Getting Started