Sony SLV-M10HF - Manual (Page 36)

Setting the clock (continued)
•CURSOR
’© '© ©
'© © ©
© © ©
©
AUTO CLOCK SET
FULL AUTO
CLOCK SET CH
TIME ZONE
OAYUGHTSAVING
Use fr*»! Lo
lYES í3o~|
h23
ET
Push the cursor stick to ^/4 to highlight
the item you want to set, then push the
cursor stick to to make the setting.
• For CLOCK SET CH
Leave the setting to "—" to have the
VCR automatically search for a channel
that carries a time-signal.
Press the number buttons to select a
channel that carries a time signal.
Use this option if you know of a channel that carries a time signal.
Most PBS member stations broadcast a time signal. For the fastest
response, select your local PBS station.
• For TIME ZONE
Select the time zone of your area, or select AUTO to have the VCR
automatically set your time zone.
The options are: AUTO -*• ATLANTIC -► EASTERN
CENTRAL -► MOUNTAIN -► PACIFIC -► ALASKA
HAWAII -► AUTO
• For DAYLIGHT SAVING
Select ON or OFF (standard time), or AUTO to have the VCR
automatically set the daylight saving time.
•CURSOR
PUSH OK
Press the cursor stick (OK).
To activate the Auto Clock Set function, turn off the VCR.
Notes
• If you use both the cable box control feature and the Auto Clock Set feature, the
VCR automatically changes channels on the cable box until a channel that carries a
time signal is found, whenever you turn off the VCR.
If you want to stop the search, change the channel on the cable box with the
CHANNEL or CH buttons either on the VCR or on the remote commander.
• If you use Hookup'l or 4rmake sure you leave the cable box on. '■
5 Getting Started