Dell XPS 700 Jet Black - Manual (Page 89)

Removing and Installing Parts
91
13 Install any drivers required for the card as described in the card documentation.
NOTE:
If you installed a sound card or a network adapter, see "Network Adapter and Sound Card Settings" on
page 96.
Removing a PCI Express Graphics Card from a Dual Configuration
NOTE:
This section regards dual configurations of PCI Express x16 graphics cards only. For removal of any other
type of PCI or PCI Express cards, see "Removing PCI and PCI Express Cards" on page 86.
1 Follow the procedures in "Before You Begin" on page 75.
2 Remove the computer cover (see "Removing the Computer Cover" on page 76).
3 If present, press the tab on the card retention device that lays over the installed cards and rotate it
upwards to gain full access to the card.
4 Gently securing both graphics cards with one hand, remove the graphics card bridge (if present) with
your other hand by pulling it up and away from the computer. Set it aside.
1 graphics card bridge 2 power connectors (2) 3 dual-PCI Express graphics
cards
1
3
2
book.book Page 91 Thursday, July 20, 2006 11:10 AM