Dell XPS 700 Jet Black - Manual (Page 60)

62
Advanced Troubleshooting
A possible graphics card failure has occurred. • Reseat any installed graphics cards (see
"Cards" on page 85).
• If available, install a working graphics card
into your computer.
• If the problem persists, contact Dell (see
"Contacting Dell" on page 145).
A possible floppy drive or hard drive failure has
occurred. Reseat all power and data cables.
A possible USB failure has occurred. Reinstall all USB devices and check all cable
connections.
No memory modules are detected. • If two or more memory modules are
installed, remove the modules (see
"Removing Memory" on page 84), then
reinstall one module (see "Installing
Memory" on page 82) and restart the
computer. If the computer starts normally,
continue to install additional memory
modules (one at a time) until you have
identified a faulty module or reinstalled all
modules without error.
• If available, install working memory of the
same type into your computer (see
"Installing Memory" on page 82).
• If the problem persists, contact Dell (see
"Contacting Dell" on page 145).
Memory modules are detected, but a memory
configuration or compatibility error has
occurred. • Ensure that no special requirements for
memory module/connector placement exist
(see "Memory" on page 81).
• Ensure that the memory you are using is
supported by your computer (see "Memory"
on page 127).
• If the problem persists, contact Dell (see
"Contacting Dell" on page 145).
Light Pattern Problem Description Suggested Resolution
book.book Page 62 Thursday, July 20, 2006 11:10 AM