Dell PowerEdge T410 - Manual (Page 91)

Installing System Components
91
Figure 3-5. Opening and Closing the System
Closing the System
1 Ensure that all internal cables are connected and folded out of the way.
2 Ensure that no tools or extra parts are left inside the system.
3 Align the cover with the slots in chassis and lower the cover into the
chassis. See Figure 3-5.
4 Press the cover into the chassis until the latch locks into place.
5 Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-5.
6 Place the system upright and on its feet on a flat, stable surface.
7 Rotate the system feet outward.
1 cover release latch 2 cover release latch lock
3 system cover 4 system feet (4)
4
3
1
2
book.book Page 91 Tuesday, June 9, 2009 4:09 PM